15 Gram Paint Booth Filters are a lighter weight filter designed for lighter use they are 2″ thick. They are lower cost than other filters we offer but will need changed more frequently. They are only 98% efficient and will capture less over spray than a thicker filter like a 22 Gram or E28 Paint Booth Filter.
15 Gram Booth Filter Pad Sizes and Quantities Available
20″ x 20″ – 50 Pack
20 x 25″ – 50 Pack
20″ x 20″ – 100 Pack
20″ x 25″ – 100 Pack
22 Gram Paint Booth Filter Pads are well suited for a variety of applications. They are the third most efficient filter after the E28 and FMP 18 Booth Filter. 2.5″ thick and a good overall paint arrestor..
Filter Pad Sizes
20″ x 20″ – Available in 50 or 100 Packs
25″ x 20″ – Available in 50 or 100 Packs
Layered Paper Paint Arrestor is a multi-layer paper paint booth filters with design elements aimed at longevity and service life. Often used as a pre-filter or with two filters in tandem, the PMM provides modest efficiency with steady airflow.
THE ANDREAE STANDARD FILTERS are designed to capture any wet solids or liquid particles in an air stream: high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.
Paint Arrestance Filtration Efficiencies: 98.2% – 99.4%
Recommended Air Velocity: 49 – 197 fpm (0.25 – 1.00 m/s)
Recommended Maximum Pressure Drop: 0.51 in wc (128 Pa)
possible up to 1.03 in wc (256 Pa) if fan allows
THE ANDREAE HIGH EFFICIENCY FILTERS are designed to capture any wet solids or liquid particles in an air stream: high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.
Paint Arrestance Filtration Efficiencies: 98.2% – 99.4%
Recommended Air Velocity: 49 – 197 fpm (0.25 – 1.00 m/s)
Recommended Maximum Pressure Drop: 0.51 in wc (128 Pa)
possible up to 1.03 in wc (256 Pa) if fan allows
Paper With Polyester Backing adds efficiency to the PMM technology by bonding it to a non-woven high efficiency polyester backing. Like PMM, the PS2 provides longevity and steady airflow but with far superior arrestance efficiency.
Paper With Polyester Backing adds efficiency to the PMM technology by bonding it to a non-woven high efficiency polyester backing. Like PMM, the PS2 provides longevity and steady airflow but with far superior arrestance efficiency.
Available Sizes In: 20" x 20" and 20" x 25" pads and rolls
Paint Pockets® is the best performing, single-stage overspray arrestor, bar none.
Specifications: Overall Arrestance Efficiency: 99.84%
Holding Capacity: Up to 6 lbs/sq ft
Initial Pres. Drop: (100 FPM): .06 in W.C. Maximum Pressure Drop: 1.00 in W.C.
Flammability Rating: UL Class II
Filter Construction: High Loft, Multi-Ply, Non-woven Polyester
Available Standard Sizes:
20″ x 20″ Pads - 30 Per Case
20″ x 25″ Pads - 30 Per Case
24″ x 50′ Blanket - 1 / Pkg.
30″ x 50′ Blanket - 1 / Pkg.
36″ x 50′ Blanket - 1 / Pkg.
40″ x 50′ Blanket - 1 / Pkg.
45″ x 50′ Blanket - 1 / Pkg.
48″ x 50′ Blanket - 1 / Pkg.
60″ x 50′ Blanket - 1 / Pkg.
Paint Pockets Green is your best value for production spray paint booths. Paint Pockets Green is specially engineered to filter both liquid and powder coating overspray generated in industrial and automotive applications. This filter is specifically designed and priced to replace expanded paper, fiberglass and other lower efficient lower cost filters. Its unique design holds up to five times more overspray than other filters, enabling you to cut your filter changes by up to 80%.
Available Standard Sizes:
20″ x 20″ Pads - 40 Per Case
20″ x 25″ Pads - 40 Per Case
30″ x 60′ Blanket - 1 / Pkg.
36″ x 60′ Blanket - 1 / Pkg.
48″ x 60′ Blanket - 1 / Pkg.
60″ x 60′ Blanket - 1 / Pkg.
FLEX™ delivers up to 15 times more life than traditional filter pads!
With triple the media of traditional pads and the real world proven capability of Paint Pockets® exclusive, patented, Diamond Pockets Technology™ (delivering 3-5 times more holding capacity per square foot of media).
FLEX with ESP lets you finish up to 15 times more product between filter changes yet mixes and matches with pads to meet your scheduling needs.
Strategic placement virtually eliminates hot spots where sprayed buildup is a problem. Use FLEX ESP where you need them most, maximizing spray time while minimizing wasted time changing filters. WE can retrofit these in place of any traditional spray booth filters.
Available Sizes In: 20" x 20", 20" x 25" and in Paint Pockets Green, White, and Blue (HEPA) Efficiencies.
The Zipper™ Mounting system can save you time during your spray booth filters change. Watch this video to see hw it works and installs into any paint booth.
E 75 filters are a popular option for the first stage of a two stage filter system including powder coating filters comes in 40 per case.
Our powder coating cube filters are commonly paired with a first stage filter to create a two stage powder coating filter design. Common options include our E75 Powder Coating Filter for the first stage in the Powder Paint Booth .
For powder paint booth recovery booths our powder coating cartridge filters work with any model powder coating spray booth. Call for help finding the right powder cartridge filter for your booth today. To find the right powder booth you need to know the cartridge length, diameter to inside and outside of the filter and bolt holes if present. Please see diagram for additional information.
This booth coating is a bright, light-reflective surface that significantly improves visibility within the booth. Quick drying and durable, the coating strips off evenly without leaving residue. Spray or roll it on to protect walls, windows and light fixtures to eliminate harmful paint residue build-up in minutes.
Available in Water-based and Solvent Based Formulas. Choose from Clear or White. Comes in 1 gallon, 5 gallon and 55 gallon sizes.
This light protective film allows fast and easy protection of fixtures, lights and windows. Its excellent adhesion properties enable it for a wide variety of applications.
Available Sizes: 12" and 18" widths by 100' in lengths.
The high strength tear resistant paper is the strongest surface protection, standing up to the heaviest machinery and foot traffic in your paint booth. Its unique, non-porous design prevents penetration to the substrate beneath. Popular with government and military operations, this exclusive tear-resistant product is highly durable.
Available Sizes: 36", 48", 60" and 72" x 300' Long rolls. 24 hour shipping on all listed sizes. Color/White.
When it comes to paint and powder coating supplies, efficiency, versatility & reliability are paramount. That’s why we are proud to present the HULKRack™ 10 the most incredible paint drying rack solution on the market. If you need more space, add HULK-X-panders™, need more supporting legs and shelves, add HULKleg-10™
The Professional Painters & Finishers TOTALDrying™ Rack - The Ultimate Paint and Powder Coat Drying Solution
Introducing the Professional Painters & Finishers TOTALDrying™ Rack, a versatile and customer-favorite drying and handling rack designed to manage all your material-handling needs efficiently. Ideal for drying cabinet doors and parts in your finishing department, this rack is an essential tool for every cabinet shop, painter, and wood finisher.
This innovative drying rack features 50 heavy-duty shelves, each capable of holding up to 25 lbs. The adjustable and removable shelves accommodate various panel thicknesses, making it perfect for drying thicker materials and longer items, including laminates. Heavy-duty locking wheels allowing you to move the rack away from the spray booth to avoid overspray and
lock the wheels for stability.
Designed to improve efficiency and productivity, this rack significantly reduces overall drying time, enabling quick turnaround on projects. The TFS Professional Painters & Finishers TOTALDrying™ Rack is trusted by professionals for its durability and functionality. Save time, money, and space with this must-have drying rack, crafted to enhance the efficiency and productivity of your paint and finishing shop
Copyright © 2018 Total Finishing Solutions - All Rights Reserved.
Total Finishing is located at 1321 NE 76TH STREET, STE. 3E, VANCOUVER, WA 98665
Powered by GoDaddy