Spray Booth Filters

Fiberglass - 15 Gram

Fiberglass Paint Arrestor

15 Gram Paint Booth Filters are a lighter weight filter designed for lighter use they are 2″ thick.  They are lower cost than other filters we offer but will need changed more frequently. They are only 98% efficient and will capture less over spray than a thicker filter like a 22 Gram or E28 Paint Booth Filter.


15 Gram Booth Filter Pad Sizes and Quantities Available

20″ x 20″ – 50 Pack

20 x 25″ – 50 Pack

20″ x 20″ – 100 Pack

20″ x 25″ – 100 Pack

Fiberglass - 22 Gram

Fiberglass Paint Arrestor 22 Gram

22 Gram Paint Booth Filter Pads are well suited for a variety of applications.  They are the third most efficient filter after the E28 and FMP 18 Booth Filter.  2.5″ thick and a good overall paint arrestor..


Filter Pad Sizes

20″ x 20″ – Available in 50 or 100 Packs

25″ x 20″ – Available in 50 or 100 Packs

Paper Filters

RP Paper Paint Arrestor

Layered Paper Paint Arrestor is a multi-layer paper paint booth filters with design elements aimed at longevity and service life. Often used as a pre-filter or with two filters in tandem, the PMM provides modest efficiency with steady airflow.


  • 6 layer paper honeycomb design
  • Can be used as single-layer prefilter
  • Can be doubled up for higher efficiency
  • Rapidly eliminates most by-pass challenges
  • Wide range of coating applications
  • Available Sizes In: 20" x 20" and 20" x 25" pads and rolls

Andreae - Standard

Andreae - Hi Efficiency Paint Arrestors

THE ANDREAE STANDARD  FILTERS are designed to capture any wet solids or liquid particles in an air stream:  high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.


   Paint Arrestance Filtration Efficiencies:  98.2% – 99.4%

   Recommended Air Velocity:  49 – 197 fpm (0.25 – 1.00 m/s)
Recommended Maximum Pressure Drop:  0.51 in wc (128 Pa)
possible up to 1.03 in wc (256 Pa) if fan allows


  • The v-shaped front wall prevents overspray bounce back and particle migration.
  • The deeper v-shape back wall captures overspray and deposits it outside of the airflow.
  • The filter exhaust holes are positioned to maintain constant airflow during the loading phase.
  • Static pressure increases slowly with the accumulation of overspray resulting in uniform airflow.

Andreae - Hi Efficiency

Andreae - Hi Efficiency Paint Arrestors

THE ANDREAE  HIGH EFFICIENCY FILTERS are designed to capture any wet solids or liquid particles in an air stream:  high solid enamels, baked and air dried enamels, glues, oils, stains, lacquers, fiberglass, epoxies, asphalts, clear coats, tar, teflon, etc.


  Paint Arrestance Filtration Efficiencies:  98.2% – 99.4%

   Recommended Air Velocity:  49 – 197 fpm (0.25 – 1.00 m/s)
Recommended Maximum Pressure Drop:  0.51 in wc (128 Pa)
possible up to 1.03 in wc (256 Pa) if fan allows


  • The v-shaped front wall prevents overspray bounce back and particle migration.
  • The deeper v-shape back wall captures overspray and deposits it outside of the airflow.
  • The filter exhaust holes are positioned to maintain constant airflow during the loading phase.
  • Static pressure increases slowly with the accumulation of overspray resulting in uniform airflow.

Paper With Polyester Backing

Expanded Paper Paint Arrestors

Paper With Polyester Backing adds efficiency to the PMM technology by bonding it to a non-woven high efficiency polyester backing. Like PMM, the PS2 provides longevity and steady airflow but with far superior arrestance efficiency.


Paper With Polyester Backing adds efficiency to the PMM technology by bonding it to a non-woven high efficiency polyester backing. Like PMM, the PS2 provides longevity and steady airflow but with far superior arrestance efficiency.


Available Sizes In: 20" x 20" and 20" x 25" pads and rolls

High Efficiency Spray Booth Filters

Paint Pockets - White

Paint Pockets Paint Arrestors, Spray Booth Filters

Paint Pockets® is the best performing, single-stage overspray arrestor, bar none. 


Specifications: Overall Arrestance Efficiency: 99.84%

Holding Capacity: Up to 6 lbs/sq ft

Initial Pres. Drop: (100 FPM): .06 in W.C. Maximum Pressure Drop: 1.00 in W.C.

Flammability Rating: UL Class II

Filter Construction: High Loft, Multi-Ply, Non-woven Polyester


Available Standard Sizes:

20″ x 20″ Pads - 30 Per Case

20″ x 25″ Pads - 30 Per Case

24″ x 50′ Blanket - 1 / Pkg.

30″ x 50′ Blanket - 1 / Pkg.

36″ x 50′ Blanket - 1 / Pkg.

40″ x 50′ Blanket - 1 / Pkg.

45″ x 50′ Blanket - 1 / Pkg.

48″ x 50′ Blanket - 1 / Pkg.

60″ x 50′ Blanket - 1 / Pkg.  

Paint Pockets - Green

Paint Pockets Green Paint Arrestors. Spray Booth Filters

Paint Pockets Green is your best value for production spray paint booths. Paint Pockets Green is specially engineered to filter both liquid and powder coating overspray generated in industrial and automotive applications. This filter is specifically designed and priced to replace expanded paper, fiberglass and other lower efficient lower cost filters.  Its unique design holds up to five times more overspray than other filters, enabling you to cut your filter changes by up to 80%.


Available Standard Sizes:

20″ x 20″ Pads - 40 Per Case

20″ x 25″ Pads - 40 Per Case

30″ x 60′ Blanket - 1 / Pkg.

36″ x 60′ Blanket - 1 / Pkg.

48″ x 60′ Blanket - 1 / Pkg.

60″ x 60′ Blanket - 1 / Pkg.

Paint Pockets - Flex

Paint Pockets Flex Cell, Spray Booth Filters. Paint Arrestors

FLEX™ delivers up to 15 times more life than traditional filter pads!


With triple the media of traditional pads and the real world proven capability of Paint Pockets® exclusive, patented, Diamond Pockets Technology™ (delivering 3-5 times more holding capacity per square foot of media).


FLEX with ESP lets you finish up to 15 times more product between filter changes yet mixes and matches with pads to meet your scheduling needs.


Strategic placement virtually eliminates hot spots where sprayed buildup is a problem. Use FLEX ESP where you need them most, maximizing spray time while minimizing wasted time changing filters.  WE can retrofit these in place of any traditional spray booth filters. 


Available Sizes In: 20" x 20", 20" x 25" and in Paint Pockets Green, White, and Blue (HEPA) Efficiencies. 

Paint Pockets - Zipper Track Booth Retrofit System

The Zipper™ Mounting system can save you time during your spray booth filters change.  Watch this video to see hw it works and installs into any paint booth.

Powder Coating Booth Filters

Powder Coating Filters - Stage 1

Polyester Paint Arrestors, Polyester Spray Booth Filters, PaintBooth Exhaust Filters

E 75 filters are a popular option for the first stage of a two stage filter system including powder coating filters comes in 40 per case.

Powder Coating Cube Filters - Stage 2

Polyester Paint Booth Arrestor. 2 Stage Paint Filter. Powder Bag Filter

Our powder coating cube filters are commonly paired with a first stage filter to create a two stage powder coating filter design.  Common options include our E75 Powder Coating Filter for the first stage in the Powder Paint Booth .

Powder Coating Cartridge Filters

Powder Cartridge Filter, Powder Coating Cartrige

For powder paint booth recovery booths our powder coating cartridge filters work with any model powder coating spray booth.  Call for help finding the right powder cartridge filter for your booth today.  To find the right powder booth you need to know the cartridge length, diameter to inside and outside of the filter and bolt holes if present.  Please see diagram for additional information. 

Spray Booth Accessories

Peelable Booth Coating

Pealable Booth Coating, Spray Booth Coating

This booth coating is a bright, light-reflective surface that significantly improves visibility within the booth. Quick drying and durable, the coating strips off evenly without leaving residue. Spray or roll it on to protect walls, windows and light fixtures to eliminate harmful paint residue build-up in minutes.


Available in Water-based and Solvent Based Formulas.  Choose from Clear or White.  Comes in 1 gallon, 5 gallon and 55 gallon sizes.

Booth Light Protective Film

Paint Booth Protective Film for Light, Spray Booth Light

This light protective film allows fast and easy protection of fixtures, lights and windows. Its excellent adhesion properties enable it for a wide variety of applications. 


Available Sizes: 12" and 18" widths by 100' in lengths.

Tear Resistant Floor Covering

Spray Booth Paper. Fire Resistant White Floor Paper. Paint Booth Paper

The high strength tear resistant paper is the strongest surface protection, standing up to the heaviest machinery and foot traffic in your paint booth. Its unique, non-porous design prevents penetration to the substrate beneath. Popular with government and military operations, this exclusive tear-resistant product is highly durable. 


Available Sizes:  36", 48", 60" and 72" x 300' Long rolls. 24 hour shipping on all listed sizes. Color/White.

Flame Retardant Brown 70# Floor Covering

Spray Booth Paper

This economical surface protection is light brown in color, easy to use, available for your paint booth in 500' rolls. Popular in paint mixing rooms and low-traffic areas, this product offers immediate OSHA compliance at minimal cost. 24-Hour shipping available on all sizes. 


Available Size: 36", 42",60", 72" wide x 500' Long.

Flame Retardant White 80# Floor Covering

Flame Retardant White Spray Booth Paper

Our highly efficient, bright white 80 lb. surface protection is ideal for light spray operations. 


Available Sizes:  36", 42", 60", 72", 84" widths x 300' Long. 


Note:  Can also be used for spray booth wall protection.

Flame Retardant White 100# Floor Covering

Flame Retardant White Spray Booth Paper

Our best selling surface protection is as tough as it is popular. The 100 lb. paper weight ensures durability and absorption even under constant operator traffic. Its bright white color promotes booth illumination. The 100 lb. white is conveniently marked with its flame retardant rating for fast easy compliance with inspectors. Available in a wide array of sizes and it works well on all spray booths. 


Available Sizes:  36", 42", 60", 72", 84" widths x 300' long rolls.

Cabinet Door Drying Racks

Cabinet Door Drying Rack.  Cabinet Rack

This versatile drying and handling rack can manage all your material-handling needs. The perfect size for drying cabinet doors and parts in your finishing department, this rack lets you load up all 50 shelves and roll it out of the way. The shelves are removable for thicker materials, or you can run longer items through the shelves. Also works well for laminates. The rack assembles and disassembles 

Contact Us for Spray Booth Filters & Accessories and Start Saving Money!